A SERVICE OF

logo

1 Remote battery cable connector
2 Remote battery cable
c. Disconnect the battery carrier cable from the battery.
d. Squeeze the clip on the side of the battery and battery carrier to remove the
battery from the battery carrier.
Note:
If your battery and battery carrier are attached with screws instead of
a locking-clip mechanism, remove the three screws to remove the battery
from the battery carrier.
1 Battery cable
2 Remote battery cable connector
3 Battery
4 Battery carrier
5 Battery connector
e. If you are instructed to return the SAS controller battery, follow all packaging
instructions, and use any packaging materials for shipping that are supplied
to you.
Chapter 5. Installing optional devices and replacing customer replaceable units 85