A SERVICE OF

logo

Open as PDF
next previous
8-118
Default Setting (System Menu)
4 Press the OK key. Backgrnd Density appears.
5 Press the or key to select [Copy(Auto)] or [Send/
Box(Auto)].
6 Press the OK key. This displays the density selection
screen for the mode selected in step 5. The screen
shown is the one when [Copy(Auto)] is selected.
7 Press the or key to select the density from [-3
Lighter] to [+3 Darker].
8 Press the OK key. Completed. is displayed and the
screen returns to the Backgrnd Density menu.
Print Density
Adjust Print Density.
Use the procedure below to adjust the Print Density.
1 In the Sys. Menu/Count. menu, press the or key to
select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu appears.
3 Press the or key to select [Print Density].
4 Press the OK key. Print Density appears.
Backgrnd Density:
a
b
*********************
2
Send/Box(Auto)
[ Exit ]
1
Copy(Auto)
Copy(Auto):
a
b
3
-1
*********************
5
+1
4
* 0 Normal
Sys. Menu/Count.:
a
b
:
Document Box
;
Edit Destination
*********************
[ Exit ]
<
Adjust/Maint.
Adjust/Maint.:
a
b
*********************
2
Send/Box Density
3
Backgrnd Density
[ Exit ]
1
Copy Denst. Adj.
Print Density:
a
b
2
2
*********************
4
4
3
*3