ADJUSTMENT
NX-800
57
1. AF level
setting
2. Sensitivity 1
adjust
(BPF adjust)
SSG
DVM
AF VTVM
Dummy
load (4Ω)
ANT
Ext.SP
connector
Volume Up/Down
knob to obtain
2.83V AF output.
(2.0W @ 4Ω load)
Write the value as
followings
[L SENS1] / [Low]
: 90
[L’ SENS1] / [Low’]
: 119
[C SENS1] / [Center]
: 150
[H’ SENS1] / [High’]
: 184
[H SENS1] / [High]
: 224
2.83V±0.3V
Output voltage
adjustment of
IC206
[ ],[ ]
[Panel
tuning
mode]
[ ],[ ]
[PC test
mode]
[ ],[ ]
[Panel test mode]
1) CH-Sig : 1-1
SSG output:
-47dBm (1mV)
(MOD: 1kHz,
Dev: ±1.5kHz)
1) Adj item:[SENS1]
Adjust:[***]
2) Adj item:
[L SENS1]→
[L’ SENS1]→
[C SENS1]→
[H’ SENS1]→
[H SENS1]
Adjust:[***]
Press [ ] key to store
the adjustment value.
1) Test Channel
Channel : 1
Test Signaling
Mode : Analog
Signaling : 1
SSG output:
-47dBm (1mV)
(MOD: 1kHz,
Dev: ±1.5kHz)
1)
Adj item:[Sensitivity 1]
2) Adj item:[Low]
[Low’]
[Center]
[High’]
[High]
Press [Apply All] button to
store the adjustment value.
Receiver Section
Item
Condition Measurement Adjustment
Specifications/
Remarks
Test-
equipment
Unit Terminal PartsUnit Method
PC test modePanel tuning mode
■ Mode, Signaling, Necessary adjustment and order
Mode Signaling
Necessary adjustment and order
Wide Narrow Very Narrow
Analog Audio 1. Balance adjust 1. Balance adjust
-
2. Analog Deviation adjust [Wide] 2. Analog Deviation adjust [Narrow]
QT 1. Balance adjust 1. Balance adjust
2. Analog Deviation adjust [Wide] 2. Analog Deviation adjust [Narrow] -
3. QT Deviation adjust [Wide] 3. QT Deviation adjust [Narrow]
DQT 1. Balance adjust 1. Balance adjust
2. Analog Deviation adjust [Wide] 2. Analog Deviation adjust [Narrow] -
3. DQT Deviation adjust [Wide] 3. DQT Deviation adjust [Narrow]
LTR 1. Balance adjust 1. Balance adjust
2. Analog Deviation adjust [Wide] 2. Analog Deviation adjust [Narrow] -
3. LTR Deviation adjust [Wide] 3. LTR Deviation adjust [Narrow]
DTMF 1. Balance adjust 1. Balance adjust
2. Analog Deviation adjust [Wide] 2. Analog Deviation adjust [Narrow] -
3. DTMF Deviation adjust [Wide] 3. DTMF Deviation adjust [Narrow]
2TONE 1. Balance adjust 1. Balance adjust
2. Analog Deviation adjust [Wide] 2. Analog Deviation adjust [Narrow] -
3. TONE Deviation adjust [Wide] 3. TONE Deviation adjust [Narrow]
MSK 1. Balance adjust 1. Balance adjust
(FleetSync) 2. Analog Deviation adjust [Wide] 2. Analog Deviation adjust [Narrow] -
3. MSK Deviation adjust [Wide] 3. MSK Deviation adjust [Narrow]
NXDN 1. Balance adjust 1. Balance adjust
- 2. NXDN Deviation adjust [Narrow] 2. Analog Deviation adjust [Narrow]
3. CWID Deviation adjust [Very Narrow]
