1. Place the seat cushion into position on the chair.
2. From the front of the chair, slide the armrest backward into place. The tab on the bottom of the armrest slides into a slot on the chair.
3. Replace the screw on the underside of the armrest.
4. Align the left-hand armrest bolt hole with the corresponding hole in the chair frame, then replace the bolt to secure it.
5. Press the side panel into place.
6. Align the front end of the footrest actuator with the mounting point on the footrest, then secure it using the pin and “C” clip.
7. Repeat steps 2 – 5 to replace the right-hand armrest.
8. Remove the object that you placed under the footrest to support it.
9. Pull the front flap over the chair frame, then attach it to the underside of the chair using the hook-and-loop fasteners
10. Plug in the chair and power it on.
Please send any questions or comments regarding these instructions to: documentation@humantouch.com
© 2012 Human Touch
®
, LLC.
3
INSTALLING THE NEW SEAT CUSHION
