A SERVICE OF

logo

Open as PDF
next previous
2
6. Carefully remove the right-hand armrest from the chair.
7. Place a box or other sturdy object underneath the footrest, to hold it in place (Fig.5).
8. Locate the footrest actuator underneath the footrest, then use a flat-head screwdriver to remove the “C” clip and pin that secures the front end of the actuator
to the footrest (Fig.6).
9. Repeat steps 3 – 5 to remove the left-hand armrest.
10. Reach underneath the front of the seat cushion, then pull down and forward on the front flap to detach it from the underside of the chair (it is attached using
hook-and-loop fasteners) (Fig.7).
11. Lift the seat cushion up and off the chair (Fig.8).
(Fig.5)
(Fig.7) (Fig.8)
(Fig.6)
“C” clip
Front flap
Seat cushion
Seat cushion