NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE:
HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE:
This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE:
FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Server Blade Configuration
Models
HP ProLiant BL45p G2 CTO Blade (US)
404840-B21
Configurable Model ships with:
Four embedded Gigabit Ethernet NIC ports:
Two (2) embedded NC373i Multifunction Gigabit Network Adapters
One (1) embedded NC324i Dual Port Gigabit Network Adapter
Plus (1) additional 10/100 NIC dedicated to iLO 2 management.
Integrated Smart Array E200i controller
NOTE:
Controller cache module selection is required. Select either the standard
64 MB module or the optional 128 MB module in step 2 below.
Two small form factor (SFF) SAS/SATA hot-plug hard drive bays
Integrated Lights-Out 2 Standard Blade Edition
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted):
Processors
For dual (2) processor configurations choose
(ONE of the following):
AMD Opteron™ processor Model 8220 (2.8 GHz, 95W) Option Kit, FIO Base
438218-L21
AMD Opteron processor Model 8218 (2.6GHz, 95W) Option Kit, FIO Base
409390-L21
AMD Opteron processor Model 8216 (2.4GHz, 95W) Option Kit, FIO Base
409391-L21
AMD Opteron processor Model 8214 (2.2GHz, 95W) Option Kit, FIO Base
409392-L21
AMD Opteron processor Model 8212 (2.0GHz, 95W) Option Kit, FIO Base
415666-L21
OR
For quad (4) processor configurations choose
(ONE of the following):
AMD Opteron processor Model 8220 (2.8 GHz, 95W) Option Kit, FIO Base
438218-L21
AMD Opteron processor Model 8218 (2.6GHz, 95W) Option Kit, FIO Base
409390-L21
AMD Opteron processor Model 8216 (2.4GHz, 95W) Option Kit, FIO Base
409391-L21
AMD Opteron processor Model 8214 (2.2GHz, 95W) Option Kit, FIO Base
409392-L21
AMD Opteron processor Model 8212 (2.0GHz, 95W) Option Kit, FIO Base
415666-L21
Plus
(ONE of the following):
AMD Opteron processor Model 8220 (2.8 GHz, 95W) Option Kit, FIO Base
438218-B21
AMD Opteron processor Model 8218 (2.6 GHz, 95W) Option Kit, FIO Base
409390-B21
AMD Opteron processor Model 8216 (2.4GHz, 95W) Option Kit, FIO Base
409391-B21
AMD Opteron processor Model 8214 (2.2GHz, 95W) Option Kit, FIO Base
409392-B21
AMD Opteron processor Model 8212 (2.0GHz, 95W) Option Kit, FIO Base
415666-B21
NOTE:
HP ProLiant BL45p G2 processor option kits (-B21 and -L21) contain two
processors.
NOTE:
The HP ProLiant BL45p G2 only supports 2 and 4 processor
configurations.
Memory
HP 1GB REG PC2-5300 2x512MB 1RANK Kit
408850-B21
QuickSpecs
HP ProLiant BL45p Generation 2 Server Blade
Configuration Information - Factory Integrated Models
DA - 12579 Worldwide QuickSpecs — Version 9 — 11.12.2007
Page 13
