A SERVICE OF

logo

Open as PDF
next previous
Removal and replacement procedures 49
To install the riser card with the bracket into the system board:
1. Align the riser card connector to the system board expansion slot and then press the riser card
assembly down to ensure full connection to the system board.
2. Fasten the screw to secure the bracket to the side of the chassis.
Figure 27 Installing the PCIe Riser Card with Bracket
To remove the PCIe expansion board:
1. Remove the screw that secures the PCIe expansion board.
2. Press the PCIe expansion board latch spring.
3. Pull the PCIe expansion board back and away from the PCIe riser card.
4. Slide the PCIe expansion board bracket across the chassis.
5. Close the PCIe expansion board latch.
Figure 28 Removing the PCIe Expansion board