A SERVICE OF

logo

Removal and replacement procedures 35
Figure 7
Processor Locations
Item Description
1 Processor 1
2 Processor 2
WARNING: To reduce the risk of personal injury from hot surfaces, allow the heat sink and the
processor to cool before touching them.
NOTE: Before installing the processor, remove the air baffle.
To remove the air baffle:
1. Gently rock the air baffle 1 up, and then take it out from the system board.
2. Lift one side of the air baffle 2 up, loosen the screw that secures it to the side of the chassis, and
then take it out from the system board.
Figure 8
Removing the Air Baffle