A SERVICE OF

logo

Open as PDF
next previous
Preparing to print
1. Verify that the printer is turned on.
2. Raise the Out tray.
3. Slide the paper-width guide all the way to the left, and then pull out the paper-
length guide.
4. Place plain paper in the In tray, pushing the paper into the printer until it stops.
5. Slide the paper guides firmly against the paper.
6. Lower the Out tray.
Printing
1. Open the Printer Properties dialog box.
2. Select the Printing Shortcuts tab, and then click Two-sided, duplex, printing in
the drop-down list.
3. In the Print on both sides drop-down list, click one of the following binding
options:
• Left edge booklet
• Right edge booklet
4. Select any other print settings that you want, and then click OK.
5. When prompted, reload the printed pages in the In tray as shown below.
6. Click Continue to finish printing the booklet.
HP Deskjet 6800 series printer
92