A SERVICE OF

logo

14
RS-232 COMMANDS
System Commands
Command Description
#ACTIVEBOLO Activates the boot loader
#FOOFF Disables the +5V of the DVI input channel
#FOON Enables the +5V of the DVI input channel
#STANDBY Enables Standby Mode
#WAKEUP Disables Standby Mode
#ACTIVEBOLO Command
The #ACTIVEBOLO command activates the boot loader. See page 16 for more
information.
Syntax:
#activebolo
Parameters:
None
Notes:
This command must be executed twice.
#FOOFF Command
The #FOOFF command disables the +5V of the DVI input channel.
Syntax:
#fooff
Parameters:
None