Gefen EXT-DVI-144DL Manual

A SERVICE OF

next previous

10

RS-232 COMMANDS

Command Syntax

Each command uses the following syntax:

#Command_Name [Space] Parameter 1 [Space] Parameter n [CR]

Sample:

#FunctionName_param1_param2_param3_param4...\r

Syntax is NOT case sensitive.

EDID Management

Command Description

#EDIDDETOLO Stores the default EDID into all inputs

#EDIDDSTOLO Read downstream EDID and stores into all inputs

#LOEDIDTOLO Loads EDID from serial port and store in any input

#PRDSEDID Reads downstream EDID and sends it to serial port

#PRLOEDID Reads local input EDID and sends it to serial port

#EDIDDETOLO Command

The #EDIDDETOLO command stores the default EDID into the inputs.

Syntax:

#ediddetolo

Parameters:

None