MEDTESTER 5000C FIELD UPGRADE INSTALLATION INSTRUCTIONS
5
IC Removal and Installation Description
There are two types of IC sockets which you may encounter—one that is plain,
and one that has a lever handle. ICs are removed or installed as follows:
Plain Socket IC Removal
• Hook the IC removal tool under each end of the IC, and pull it out
of the socket, OR
• Insert a small flat-bladed screwdriver under alternate ends, and
carefully pry them up until the IC comes out.
Plain Socket IC Installation
• Press the IC into the socket firmly.
Lever Handle IC Socket Removal
• Hold down the IC firmly with a finger, and
• Pull the lever up. Remove the IC by hand.
Lever Handle IC Socket Insertion
• Make sure the lever is up.
• Insert the IC by hand.
• Push the lever to one side to lock in the IC.
