6-9
USP 507 • HTML Operation
Passwords page
Access the Passwords page (figure 6-7) by clicking the Passwords link on the
sidebar menu on the Configuration page.
Figure 6–7 — Passwords page
The fields on the Passwords page are for entering and verifying administrator and
user passwords. Passwords are case sensitive and are limited to 12 upper- and
lowercase alphanumeric characters. Each password must be entered twice – once
in the Password field and then again in the Re-enter Password field to the right.
Characters in these fields are masked by four bullets (••••). If you do not want to
password-protect an access level, leave the Password and the Re-Enter Password
fields blank. After entering the desired password in both fields, click Submit at the
bottom of the page.
N
An administrator password must be created before a user password can be
created.
Some items may not be available or may be viewable only, when logged in
as a user.
To clear an existing password so that no password is required, delete the bullets
in the Password and Re-enter Password fields and enter a space in each field, then
click Submit at the bottom of the page.
