14. Connect the power and data cables to the new drive.
15. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
16. Replace the front panel.
17. Replace the computer cover.
18. Connect your computer and devices to electrical outlets, and turn them on.
19. See the documentation that came with the drive for instructions on installing any software required for drive operation.
Adding a Second CD/DVD Drive
1. Shut down the computer through the Start menu.
2. Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut
down your computer, turn them off now.
3. Disconnect any telephone or telecommunication lines from the computer.
4. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.
5. Remove the computer cover.
6. Remove the front panel.
7. Remove the front-panel insert.
8. Reach inside the computer and push the metal plate towards you so that it snaps off of the computer.
9. Ensure that the jumper setting on the new drive is set for "cable select" (see the documentation that came with the drive for information).
10. Remove two of the extra alignment screws from the front of the computer and insert them into the drive.
HINT: Drives sold by Dell come with their own operating software and documentation. After you install a drive, see the documentation that came with
the drive for instructions on installing and using the drive software.
NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.
