2-82
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
advertise (redirect virtual server submode)
advertise (redirect virtual server submode)
To allow the CSM to advertise the IP address of the virtual server as the host route, use the advertise
command in the SLB redirect virtual server configuration mode. To stop advertising the host route for
this virtual server, use the no form of this command.
advertise [active]
no advertise
Syntax Description
Defaults The default for network mask is 255.255.255.255 if the network mask is not specified.
Command Modes SLB redirect virtual server configuration submode
Command History
Usage Guidelines Without the active option, the CSM always advertises the virtual server IP address whether or not there
is any active real server attached to this virtual server.
Examples This example shows how to restrict a client from using the redirect virtual server:
Cat6k-2(config-slb-redirect-vs)# advertise 10.5.2.1 exclude
Related Commands advertise (virtual server submode)
show module csm vserver redirect
active (Optional) Allows the CSM to advertise the IP address of the virtual
server as the host route.
Release Modification
CSM release 1.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.
