Using Your Hub Software 3-35
Management Configuration Commands
ip trap-manager
ip trap-manager enable
ip trap-manager disable
Syntax: ip trap-manager {index} {ip-address} [community name]
Mode: Administrator
Description: Configures trap manager information.
Command Keyword Definitions
• index—Index of an entry in the trap manager table. An integer from 1 to 5.
• ip-address—IP address of the trap receiver, in the following format:
xxx.xxx.xxx.xxx
• community name—Community string that is required for trap access.
Syntax: ip trap-manager enable {index}
Mode: Administrator
Description: Enables a trap manager entry.
Command Keyword Definition
index—Index of a trap manager table entry. An integer between 1 and 5.
Syntax: ip trap-manager disable [index]
Mode: Administrator
Description: Disables a trap manager entry.
Command Keyword Definition
index—Index of a trap manger table entry. An integer between 1 and 5.
