Central Hydraulics 99887 Manual

A SERVICE OF

next previous

SKU 99887 For technical questions, please call 1-800-444-3353. Page 9

MAINTENANCE AND

SERVICING

Procedures not specically

explained in this manual

must be performed only by a

qualied technician.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Remove any load from the

Motorcycle Lift before

performing any inspection,

maintenance, or cleaning

procedures.

TO PREVENT SERIOUS

INJURY FROM TOOL

FAILURE:

Do not use damaged

equipment. If abnormal noise

or vibration occurs, have the

problem corrected before

further use.

Inspection, Maintenance, and

Cleaning

1. BEFORE EACH USE, inspect the

general condition of the Motorcycle

Lift. Check for loose screws, mis-

alignment or binding of moving parts,

cracked or broken parts, damaged

straps, and any other condition that

may affect its safe operation.

2. TO BLEED LIFT OF EXCESS AIR

AND FILL WITH HYDRAULIC OIL:

See “ASSEMBLY” section in this

manual for instructions.

(See pages 6 thru 7.)

If the Lift fails to

operate properly

after bleeding and lling with hy-

draulic oil, it MUST NOT be used

until it is serviced by a qualied

technician.

3. AFTER USE, clean the external

surfaces of the Motorcycle Lift with a

clean cloth.

4. WHEN STORING, make sure to store

the Motorcycle Lift in a clean, dry,

safe location out of reach of children

and other unauthorized persons.

PLEASE READ THE

FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR

DISTRIBUTOR HAS PROVIDED THE

PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS MANUAL AS A REFERENCE

TOOL ONLY. NEITHER THE

MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION

OR WARRANTY OF ANY KIND TO

THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS

TO THE PRODUCT, OR THAT HE OR

SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN

FACT, THE MANUFACTURER AND/

OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND

PARTS REPLACEMENTS SHOULD

BE UNDERTAKEN BY CERTIFIED

AND LICENSED TECHNICIANS, AND

NOT BY THE BUYER. THE BUYER

ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS

TO THE ORIGINAL PRODUCT OR

REPLACEMENT PARTS THERETO,

OR ARISING OUT OF HIS OR HER

INSTALLATION OF REPLACEMENT

PARTS THERETO.