SKU 99887 For technical questions, please call 1-800-444-3353. Page 7
f. Test the Motorcycle Lift to make sure
it is functioning properly before at-
tempting to lift a load.
(See Figure G.)
FIGURE G
RELEASE
VALVE
(23X)
OIL
PLUG
(38A)
JACK
(1)
PRODUCT FEATURES
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
1. To transport the Motorcycle Lift, grasp
the Handle of the Post (19) rmly
with both hands. Lower the Lift until
the two Wheels (7) contact the oor
surface, and slowly push the unit to its
work location.
(See Figure I.)
2.
FIGURE I
WHEELS
(7)
Make sure the work location is a
clean, dry, oil/grease free, level, oor
surface capable of supporting the
weight of the Motorcycle Lift, its load,
and any other tools and equipment.
3. Check to make sure the Motorcycle
Lift is fully lowered. If not, turn the
Release Valve (23X) counterclock-
wise and allow the Arm Lift (13) to
lower until it contacts the oor sur-
face. Then turn the Release Valve
clockwise until it stops.
(See Figure G.)
4. Slide the Arm Lift (13) under the mo-
torcycle, making sure the Arm Lift is
FIGURE H
HANDLE
(18)
STRAP
WITH
HOOK
(25)
ARM LIFT
ASSY.
(13)
RUBBER
PAD
(15)
BASE
LEG
(12)
RELEASE
VALVE
(23X)
STRAP
RELEASE
LEVER
(24)
