ADJUSTMENTS DURING THE EMBROIDERY PROCESS
224
If the Thread Breaks During
Sewing
Press the “Start/Stop” button to stop the
machine.
If the upper thread is broken, redo the
upper threading. If the bobbin thread is
broken, press and follow the
directions in steps
through
from the
previous section to reset the bobbin.
Press .
Press , , or to move the
needle back the correct number of stitches
before the spot where the thread broke.
* If you cannot move back to the spot where the
thread broke, press to select the color and
move to the beginning position of that color, then
use , , or to move ahead to
slightly before where the thread broke.
Press to return to the original screen.
Press the “Presser Foot Lifter” button to
lower the presser foot, and press the “Start/
Stop” button to continue sewing.
