BE-1204B-BC • BE-1206B-BC 5-7
Chapter 5 Setting
3. Select by pressing
.
4. Input sensitivity of the thread breakage sensor.
W0491Q
5. Press .
Modified setting is saved and the previous screen is displayed again.
Automatic Step-Back
The number of stitches to step back automatically in case of a thread breakage can be set.
! Setting can be done within the range of 0 ~ 10 stitches.
! This function is previously set to 0 stitches upon shipments.
1. Press
twice.
2. Select
by pressing
.
W0473Q
3. Input the number of stitches to step back automatically by pressing ten keys.
Pressing sets whether to execute an extra step-back by a sensitivity amount of the thread
breakage sensor in the automatic step-back mode.
When stepping back by a sensitivity
amount of the thread breakage sensor
W0492Q
When stepping back by preset number
of stitches
W0493Q
4. Press .
Modified setting is saved and the previous screen is displayed again.
Total number of stitches to step back in
the automatic step-back mode
