2-8 BE-1204B-BC • BE-1206B-BC
Chapter 2 Embroidering Procedures
Turn on the Machine Power
W1262Q W1265Q W1404Q W1266Q
1. Turn on the main power switch.
2. Reset the emergency stop switch.
3. Change the Flat / Cap hoop select switch on the operation panel according to the hoop to be used.
4. Press the power switch.
5. A message is displayed on the LCD as soon as the power is turned ON.
BE-1204B-BC
W1263Q
BE-1206B-BC
W1264Q
6. The alarm sounds three times. The hoop moves back to the zero point and the sewing screen is
displayed.
W0406Q
The speed range and actual speed is displayed.
sequence of changing colors is displayed.
sequence of colors is displayed.
total number of stitches is displayed.
data name is displayed.
number of colors registered in data is displayed.
kind of hoop is displayed.
Operational icons are basically displayed; however, some icons,
such as
, may not be on the screen.
n angle at which the hoop feeding finishes is displayed.
Emergency stop switch
Power switch
Flat / Cap hoop select switch
Main power switch
