49
Using the projector
English
Advanced Setup menu
Function Description
Lamp Settings
Lamp Power
Selects the projector lamp power between Normal and Economic modes.
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to "0". See
"Resetting the lamp timer" on page 55 for details.
Equivalent Lamp Hour
Shows the lamp hour information. See "Getting to know the lamp hour" on
page 52 for details.
HDMI Settings
Selects an input source type for the HDMI signal. Auto is the default and
recommended setting. You can also manually select the source type. The
different source types carry different standards for the brightness level.
This function is only available when the HDMI signal is selected.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can
connect the projector using a suitable RS-232 cable and update or download
the projector’s firmware. This function is intended for qualified service
personnel.
Test Pattern
Press ENTER to display the grid test pattern. It helps you adjust the image size
and focus and check that the projected image is free of distortion.
The function is only available when the projector detects no input
signal.
High Altitude
Mode
A mode for operation in areas like high altitude or high temperature. See
"Operating in a high altitude environment" on page 39 for details.
Audio Settings
See "Adjusting the sound" on page 36 for details.
Password
Password
Limits use of the projector to only those who know the correct password. See
"Utilizing the password function" on page 23 for details.
Change Password
You will be asked to enter the current password before changing to a new one.
See "Utilizing the password function" on page 23 for details.
Lan Control
Settings
See "Controlling the projector through a Lan environment" on page 37 for
details.
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: names of user modes,
Keystone, Language, Projector Position, High Altitude Mode,
Password, and Expert Mode.
Expert Mode
The Expert Mode menu is password protected and only accessible by
authorized calibrators. The ISF (Imaging Science Foundation) has developed
carefully crafted, industry-recognized standards for optimal video performance
and has implemented a training program for technicians and installers to use
these standards to obtain optimal picture quality from BenQ video display
devices. Accordingly, we recommend that setup and calibration be performed
by an ISF certified installation technician.
For more information, please go to www.imagingscience.com or
contact the place you purchased the projector.
SH940_EN.book Page 49 Wednesday, October 3, 2012 2:36 PM
