10
Overview
English
Controls and functions
Control panel
6. Arrow/Keystone keys (Left / , Up /
, Right /, Down/)
Moves the current On-Screen Display (OSD)
menu selection in the direction of the arrow
being pressed when the OSD menu is
activated.
Manually corrects distorted pictures resulting
from an angled projection.
7. POWER
Performs the same action as POWER on the
remote control.
Toggles the projector between standby and on.
8. SOURCE
Performs the same action as the source
selection keys on the remote control.
Switches sequentially through input sources.
9. MENU
Toggles the On-Screen Display (OSD) menu on
and off.
10.PRESET MODE
Sequentially selects a predefined picture setting
available for each input.
11.EXIT
Goes back to previous OSD menus, exits and
saves any changes made using the On-Screen
Display (OSD) menu.
12.ENTER
Enacts the selected On-Screen Display (OSD)
menu item.
1. Focus ring
Adjusts the focus of the projected image.
2. Zoom ring
Adjusts the size of the projected image.
3. LAMP indicator light
Lights up or flashes when the projector lamp
has developed a problem.
4. TEMPerature warning light
Lights up or flashes if the projector's
temperature becomes too high.
5. POWER indicator light
Lights up or flashes when the projector is
operating.
SH940_EN.book Page 10 Wednesday, October 3, 2012 2:36 PM
