Introduction12
English
Remote control effective range
Infra-Red (IR) remote control sensor is located on
the front and the rear of the projector. The remote
control must be held at an angle within 30 degrees
perpendicular to the projector's IR remote control
sensor to function correctly. The distance between
the remote control and the sensor should not
exceed 7 meters (~ 23 feet).
Make sure that there are no obstacles between the
remote control and the IR sensor on the projector
that might obstruct the infra-red beam.
13. /
Right cursor:
Navigates and changes settings in the
OSD. See "Using the menus" on page 26
for details.
:
Activates panel key lock. See "Locking
control keys" on page 42 for details.
When the On-Screen Display (OSD)
menu is activated, the #5, #7, #10, and
#13 keys are used as directional arrows to
select the desired menu items and to make
adjustments. See "Using the menus" on
page 26 for details.
14. Source
Displays the source selection bar. See
"Switching input signal" on page 30 for
details.
15. Page Up/ Down
Page up or down arrow when connected
through USB to a PC. See "Remote
paging operations" on page 41 for details.
16. Timer On/Set up
Turns on/off the Presentation Timer.
Changes settings in the Presentation
Timer menu.
