Beko WMD 78144 Manual

A SERVICE OF

next previous

EN

28

• Placealargecontainerinfrontofthe

filter to receive water flowing from

the filter.

• Loosenpumpfilter(anticlockwise)

until water starts to flow out of it.

Direct the flowing water into the

container you have placed in front

ofthefilter.Youcanuseapieceof

cloth to absorb any spilled water.

• Whenthereisnowaterleft,turnthe

pump filter until it is completely loose

and remove it.

• Cleananyresiduesinsidethefilter

as well as fibers, if any, around the

propeller region.

• Ifyourproducthasawaterjet

feature, be sure to fit the filter into

its housing in the pump. Never force

the filter while replacing it into its

housing. Fit the filter fully into its

housing;otherwise,watermayleak

from the filter cap.

4- Close the filter cap of your product by

fitting the tabs on the bottom into their

positions and pushing the upper part of

it.