Beko WMD 78144 Manual

A SERVICE OF

next previous

EN

23

buttons for 3 sec.

“C:OFF”(Child-prooflockisdeactivated)

label appears on the screen.

Ending the program through

canceling

“Start/Pause/Cancel”button(Figure

2-10)ispressedfor3secondstocancel

theprogram.Startsymbol(Figure

3-13j)willflashduringcancellation.

After cancellation, the symbol of the

corresponding step at which the

cancellation was made will remain lit and

“End”willappearonthescreen.

Program in rinse hold mode

•

This process is shown with the

flashingSpinSymbol(Figure3-13c)

and the lit up Standby Symbol

(Figure3-13k).

If you wish to spin when the machine is

inthismode:

Adjustthespinspeed.Press“Start/

Pause/Cancel”button(Figure2-10).

The program continues, pumps out the

water and spins. The Standby Symbol

(Figure3-13k)fadesoutandStart

Symbol(Figure3-13j)lightsup.

If you want to discharge the water only

withoutspinning:

Press“Start/Pause/Cancel”button

(Figure2-10).TheStandbysymbol

(Figure3-13k)willfade.TheStartsymbol

(Figure3-13j)willlightup.Theprogram

continues and only drains the water.

End of program

When the program is finished, the

symbols of the relevant steps will remain

lit up and the auxiliary function, spin and

temperature data selected at the start-

up of the program will remain selected.

“End”willappearonthedisplay.