MM70xG2-UM-03 1-1
1
Chapter
INSTALLATION
OVERVIEW
The MM701G2 and MM702G2 are versatile, high-speed modems that connect an Ethernet LAN to one or more
service providers using G.shdsl transmission technology. The connections provide instant and high-speed
broadband access to the Internet or to other types of Wide Area Networks (WANs). The MM701G2 and MM702G2
provide the following:
• Configuration either as a point-to-point LAN extension or as an end-connection to a DSLAM (see “Organization”
on page xiii for the process you must follow to complete either installation)
• Larger packet sizes to accommodate VLAN traffic (Maximum Ethernet Frame = 1536 bytes)
• 32 simultaneous Bridge/Router or PPP sessions to the same or different service providers over the
WAN interface
• Protocols and services such as DHCP server, DNS Relay, NAT, OAM, and RIP
UNPACK THE MODEM
If you store the modem for a long period of time, use the original antistatic bag and packaging. Observe
environmental specifications as provided in Appendix B: Specifications.
Step Action
1 Remove the modem from the packaging (see Figure 1-1).
Figure 1-1. Remove the Modem
2 Visually inspect the container for signs of damage. If the equipment was damaged in transit, report the
damage to the transportation company and to the sales representative.
3 Check the contents of the package for:
• 6 Vdc power supply with cord
• Black CAT5 cable for Ethernet connection
• Silver cord for DSL connection
• Flat cable (gray) and DB-9 port adapter for console port
connection
• USB cable
C
O
L
S
Y
N
C
P
W
R
T
X
R
X
M
A
R
L
IN
K
R
X
T
X
M0151-A
