Filter
Top Products
32
F8-13
F8-14
8. Operation
English
■ CHAIN BRAKE
This machine is equipped with an automatic brake to
stop saw chain rotation upon occurrence of kickback
while in saw cutting operation. The brake is
automatically operated by inertial force which acts on
the weight fitted inside the front guard.
This brake can also be operated manually with the
front guard turned down to the guide bar.
To release brake, pull up the front guard toward the
front handle till "click" sound is heard.
(1) Front handle
(2) Released
(3) Braking
(4) Brake lever
Be sure to confirm brake operation on the daily
inspection.
How to confirm:
1) Turn off the engine.
2) Holding the chain saw horizontally, release your
hand from the front handle, hit the tip of the guide
bar to a stump or a piece of wood, and confirm
brake operation. Operating level varies by bar size.
In case the brake is not effective, ask our dealer
inspection and repairing.
The engine, if being kept rotated at high speed with the
brake engaged, heats the clutch, causing a trouble.
When the brake is operated while in operation,
immediately release your fingers from the throttle lever
and stop the engine.
■ STOPPING ENGINE
1. Release the throttle lever to allow the engine idling
for a few minutes
2. Put the switch to the "O" (STOP) position. (F8-14)
(1) Switch
IMPORTANT
F8-12