Filter
Top Products
6. Maintenace
Before cleaning, inspecting or repairing
your unit, make sure that engine has
stopped and is cool. Disconnect the spark
plug to prevent accidental starting.
A. Maintenance after each use
1. Air filter
Dust on the cleaner surface can be removed by
tapping a corner of the cleaner against a hard
surface. To clean dirt in the meshes, split the
cleaner into halves and brush in gasoline. When
using compressed air, blow from the inside.
To assemble the cleaner halves, press the rim until
it clicks.
2. Oiling port
Dismount the guide bar and check the oiling port
for clogging.
3. Guide bar
When the guide bar is dismounted, remove
sawdust in the bar groove and the oiling port.
Grease the nose sprocket from the feeding port on
the tip of the bar.
4. Others
Check for fuel leakage and loose fastenings and
damage to major parts, especially handle joints
and guide bar mounting. If any defects are found,
make sure to have them repaired before operating
again.
12