Filter
Top Products
G3300 / G3300EZ / G3300E
GB-3
G
B
Contents
1. For Safe Operation ................................................................... 4
2. Explanation of Symbols on the Machine .................................. 6
3. Installing Guide Bar and Saw Chain......................................... 6
4. Fuel and Chain Oil .................................................................... 8
5. Operating the Engine ............................................................... 9
6. Sawing .................................................................................... 11
7. Maintenance ........................................................................... 12
8. Maintenance of Saw Chain and Guide Bar ............................ 14
9. Troubleshooting Guide ........................................................... 15
10. Disposal .................................................................................. 15
11. Specifications ......................................................................... 16
Masahiko GOUDA
General Manager, Quality Assurance Department
Signed in Saitama, Japan
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition
Internal control production
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
No. 9, 1-Chome
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW :
Model : G3300 G3300EZ
Serial no. : 800001 and up
Make : ZENOAH
CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES
DIRECTIVE (Directive 98/37/EC) AND TO THE NATIONAL REGULATIONS
GOVERNING ITS TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A “CE”CERTIFICATE, NO. M.0303.04.3211
(G3300), M.0303.04.3212 (G3300EZ) BY THE ISTITUTO CERTIFICAZIONE
EUROPEA PALAZZO DEL VESCOVO - V. GARIBALDI, 20 40011 ANZOLA DELL’
EMILIA - ITALY
1st December 2007
Masahiko GOUDA
General Manager, Quality Assurance Department
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition
Internal control production
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
No. 9, 1-Chome
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW :
Model : G3300E
Serial no. : 800001 and up
Make : ZENOAH
CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES
DIRECTIVE (Directive 98/37/EC) AND TO THE NATIONAL REGULATIONS
GOVERNING ITS TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A “CE”CERTIFICATE, NO. U3 2692468 01BY
TÜV Rheinland Group - TÜV Rheinland InterCert kft. Product Certification - H -
1061 Budapest Paulay Ede u. 52 - HUNGARY
Signed in Saitama, Japan 1st December 2007