Filter
Top Products
G2500
G
B
GB-3
Contents
1. For Safe Operation ................................................................... 4
2. Explanation of Symbols on the Machine .................................. 8
3. Installing Guide Bar and Saw Chain......................................... 9
4. Fuel and Chain Oil .................................................................. 10
5. Operating the Engine ............................................................. 11
6. Sawing .................................................................................... 12
7. Maintenance ........................................................................... 14
8. Maintenance of Saw Chain and Guide Bar ............................ 15
9. Troubleshooting Guide ........................................................... 16
10. Specifications ......................................................................... 17
11. Limited Warranty ..................................................................... 17
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition
Internal control production
MANUFACTURER : KOMATSU ZENOAH
No. 9, 1-Chome
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED
BELOW:
Model : G2500
Serial no. : 100101 and up
Maker : KOMATSU ZENOAH
CONFORMS TO THE REQUIREMENTS OF THE MODIFIED MACHINES
DIRECTIVE (Directive 98/37/EC) AND TO THE NATIONAL REGULA-
TIONS GOVERNING ITS TRANSPOSITION ABROAD: AND
THAT IT HAS BEEN ISSUED WITH A “CE” CERTIFICATE,
NO. M. 0303. 02. 2737-08/02
BY THE ISTITUTO CERTIFICAZIONE EUROPEA PALAZZO DEL
VESCOVO - V. GARIBALDI, 20 40011 ANZOLA DELL’ EMILIA - ITALY
Signed in Saitama, Japan 1st September 2001
Isamu NAKAZATO
General Manager, Quality Assurance Department