Filter
Top Products
G2500
G
B
GB-17
10. Specifications
Power unit:
Displacement (cm
3
): ............................................. 25.4
Fuel: ................ Mixture (Gasoline 50 : Two-cycle oil 1)
Fuel tank capacity (cm
3
): ....................................... 230
Chain oil: ................................. Motor oil SAE# 10W-30
Oil tank capacity (cm
3
):.......................................... 160
Carburetor: ......................................... Diaphragm type
lgnition system:: .......................................... Solid State
Spark plug:......................................Champion RCJ-7Y
Oil feeding system: ......................... Mechanical pump
Dimensions (L x W x H) (mm): ............ 265 x 220 x 220
Dry weight
Power unit only (kg): ............................................... 2.8
Power: ......................................... 0.96/9,000 (kw/min
-1
)
Max. speed ............................................ 12,500 (min
-1
)
Idle speed ................................................ 2,900 (min
-1
)
11. Limited warranty
Should any failure occur on the product under normal
operating conditions within the applicable warranty pe-
riod, the failed part will be replaced or repaired free of
charge by a KOMATSU ZENOAH authorized dealer.
WARRANTY PERIOD: 1 year (6 months if used profes-
sionally, and 30 days if used for rental purpose) from
the date of initial purchase.
THE PURCHASER SHALL BEAR COSTS OF TRANS-
PORTING THE UNIT TO AND FROM THE KOMATSU
ZENOAH DEALER.
THE PURCHASER SHALL NOT BE CHARGED FOR DI-
AGNOSTIC LABOR WHICH LEADS TO THE DETERMI-
NATION THAT A WARRANTED PART IS DEFECTIVE, IF
THE DIAGNOSTIC WORK IS PERFORMED AT THE
KOMATSU ZENOAH DEALER.
THE PURCHASER OR OWNER IS RESPONSIBLE FOR
THE PERFORMANCE OF THE REQUIRED MAINTE-
NANCE AS DEFINED BY THE MANUFACTURER IN THE
OWNER/OPERATOR MANUAL.
ANY WARRANTED PART WHICH IS NOT SCHEDULED
FOR REPLACEMENT AS REQUIRED MAINTENANCE,
OR WHICH IS SCHEDULED ONLY FOR REGULAR IN-
SPECTION TO THE EFFECT OF REPAIR OR “REPLACE
AS NECESSARY” SHALL BE WARRANTED FOR THE
WARRANTY PERIOD. ANY WARRANTED PART WHICH
IS SCHEDULED FOR REPLACEMENT AS REQUIRED
MAINTENANCE SHALL BE WARRANTED FOR THE
PERIOD OF TIME UP TO THE FIRST SCHEDULED
REPLACEMNET POINT FOR THE PART.
ANY REPLACEMENT PART THAT IS EQUIVALENT IN
PERFORMANCE AND DULABILITY MAY BE USED IN
NON-WARRANTY MAINTENANCE OR REPAIRS, AND
G
B
SHALL NOT REDUCE THE WARRANTY OBLIGATION
OF THE COMPANY.
THE COMPANY IS LIABLE FOR DAMAGES TO OTHER
ENGINE COMPONENTS CAUSED BY THE FAIRURE OF
A WARRANTED PARTS STILL UNDER WARRANTY.
THE WARRANTY DOES NOT APPLY TO THOSE UNITS
WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF
INSTRUCTION LISTED IN THE OWNER/OPERATOR
MANUAL FOR PROPER USE AND MAINTENANCE OF
THE UNITS ACCIDENT MISHANDLING, ALTERATION,
ABUSE, IMPROPER LUBULICATION, USE OF ANY
PARTS OR ACCESSARIES OTHER THAN THOSE
SPECIFIED BY THE COMPANY, OR OTHER CAUSES
BEYOND THE CONPANY'S CONTROL.
THIS WARRANTY DOES NOT COVER THOSE PARTS
REPLACED BY NORMAL WEAR OR HARMLESS
CHANGES IN THEIR APPEARANCE.
THERE ARE NO OTHER EXPRESS WARRANTIES.
IMPLIED WARRANTIES INCLUDING THOSE OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED TO TWO (2) YEARS OF HOME
USE [ONE (1) YEAR FOR ANY OTHER USE] FROM THE
ORIGINAL DELIVERY DATE.
LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGE UNDER ANY AND ALL WARRANTIES ARE
EXCLUDED.
IF YOU NEED TO OBTAIN MORE INFORMATION,
PLEASE CALL YOUR NEAREST SERVICE CENTER, OR
CHECK PLEASE KOMATSU ZENOAH WEB SITE
http://
www.zenoah.net
Cutting head:
<Sprocket bar>
Sprocket: .................................................................. 6T
Chain speed at max. power ......................... 17.1 (m/s)
Guide bar
Type: ................................................ Sprocket nose
Size (in. (mm)): ............................................. 10 (25)
Saw chain
Type: ................................................. Oregon 91VG
Pitch (in. (mm)):.......................................... 3/8 (9.4)
Gauge (in. (mm)):................................... 0.05 (1.25)
<Hard nose bar>
Sprocket: .................................................................. 8T
Chain speed at max. power ......................... 15.2 (m/s)
Guide bar
Type: .......................................................Hard nose
Size (in. (mm)): ............................................. 10 (25)
Saw chain
Type: ..................................................Oregon 25AP
Pitch (in. (mm)):........................................ 1/4 (6.25)
Gauge (in. (mm)):................................... 0.05 (1.25)
G2500 are equipped with Chain Brake.
Specifications are subject to change wihout notice.