Filter
Top Products
English
■ CUTTING WORK
•Weather conditions and altitude
may effect carburation.
• Do not allow anyone to stay
close to the hedge-trimmer
while working or while
adjusting the carburetor.
■ HOW TO USE
HANDLE [eHT603D only] (F5)
To reduce fatigue when trimming
hedges, the handle can be swivelled
through 90° to the left or right.
Do not press the throttle during
this operation!
Proceed as follows:
1. Free the handle by pressing the
locking lever.
2. Turn the handle until the locking
lever clicks into place.
3. When the handle is locked in its
new position, you can apply the
throttle again.
(1) Handle
(2) Locking lever
• Use only as much throttle as is
needed to do the job. Excessive
engine speed is unnecessary.
• Avoid cutting thick branches, for
which will damage the blades and
shorten the life of drive systems.
• Tilting the trimmer 5 to 10° to the
cutting object will make the job
easy and bring a good result.
•Always keep your body to the
carburetor side of your trimmer,
never on the muffler side.
• When a new machine is first
operated, in the first few minutes
grease may come out of the gear
case. But, since this is excess
grease, there is no cause for
alarm. Just wipe it off with the
engine stopped for next use.
WARNING
5. OPERATION
F7
F6
F5 [eHT603D]
14