Filter
Top Products
■ INSTALLING HANDLE (SE1)
•Mount the handle to the shaft tube and clamp it
at your best operating position.
■ INSTALLING DEBRIS GUARD (SE2)
• Put the debris guard on the bearing case, attach
it with the screw, washer, nut and support plate
provided.
(1) Support plate
■ INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft by inserting the
attached hexagon bar into the upper holder and
the housing.
2. Rotate the cutting head to engage threads.
Hand-tighten it securely.
6. Set up
SE1
(1)
SE2
SE3
11