Filter
Top Products
10
5. For safe operation
■ HANDLING FUEL
1. The engine of the KOMATSU ZENOAH product
is designed to run on a mixed fuel which
contains highly flammable gasoline. Never store
cans of fuel or refill the tank of the unit in any
place where there is a boiler, stove, wood fire,
electrical sparks, welding sparks, or any other
source of heat or fire which might ignite the fuel.
2. Never smoke while operating the unit or refilling
its fuel tank.
3. When refilling the tank, always turn off the
engine and allow it to cool down. Take a careful
look around to make sure that there are no
sparks or open flames anywhere nearby before
refueling.
4. Wipe spilled fuel completely using a dry rag if
any fuel spillage occurs during refueling.
5. After refueling, screw the fuel cap back tightly
onto the fuel tank and then carry the unit to a
spot 10feet (3m) or more away from where it
was refueled before turning on the engine.
■ TRANSPORTATION
1. When hand-carrying the product, cover over the
cutting part if necessary, lift up the product and
carry it paying attention to the blade.
2. Never transport the product over rough roads
over long distances by vehicle without removing
all fuel from the fuel tank. If doing so, fuel might
leak from the tank during transport.