Filter
Top Products
G455AVS / G500AVS
G
B
GB-3
Contents
1. For Safe Operation ................................................................... 4
2. Explanation of Symbols on the Machine .................................. 6
3. Installing Guide Bar and Saw Chain......................................... 7
4. Fuel and Chain Oil .................................................................... 8
5. Operating the Engine ............................................................... 9
6. Sawing .................................................................................... 11
7. Maintenance ........................................................................... 12
8. Maintenance of Saw Chain and Guide Bar ............................ 13
9. Troubleshooting Guide ........................................................... 14
10. Disposal .................................................................................. 14
11. Specifications ......................................................................... 15
Masahiko GOUDA
General Manager, Quality Assurance Department
Signed in Saitama, Japan
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition
Internal control production
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
No. 9, 1-Chome
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW :
Model : G500AVS18
Serial no. : 800001 and up
Make : ZENOAH
CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES
DIRECTIVE (Directive 98/37/EC, 89/336/EEC) AND TO THE NATIONAL
REGULATIONS GOVERNING ITS TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A “CE”CERTIFICATE, NO. 380-080-A-0026-
12-94, BY THE CENTRE TECHNIQUE DU BOIS ET DE L’AMEUBLEMENT
(TECHNICAL CENTRE FOR WOOD AND FURNITURE), 10 AVENURE DE
SAINT-MANDE, 75012 PARIS.
1st December 2007
Masahiko GOUDA
General Manager, Quality Assurance Department
Signed in Saitama, Japan
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition
Internal control production
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
No. 9, 1-Chome
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW :
Model : G455AVS18
Serial no. : 800001 and up
Make : ZENOAH
CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES
DIRECTIVE (Directive 98/37/EC, 89/336/EEC) AND TO THE NATIONAL
REGULATIONS GOVERNING ITS TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A “CE”CERTIFICATE, NO. 380-080-A-0025-
12-94, BY THE CENTRE TECHNIQUE DU BOIS ET DE L’AMEUBLEMENT
(TECHNICAL CENTRE FOR WOOD AND FURNITURE), 10 AVENURE DE
SAINT-MANDE, 75012 PARIS.
1st December 2007