Zenoah G500AVS Chainsaw User Manual


 
G455AVS / G500AVS
G
B
GB-15
10. Specifications
Power unit:
Displacement (cm
3
):
G455AVS ............................................................ 45.0
G500AVS ............................................................ 49.3
Fuel: ................ Mixture (Gasoline 50 : Two-cycle oil 1)
(when using ZENOAH genuine oil)
Fuel tank capacity (cm
3
): ....................................... 550
Chain oil: ................................. Motor oil SAE# 10W-30
Oil tank capacity (cm
3
):.......................................... 260
Carburetor: .....................Diaphragm type (Walbro WT)
ignition system: .....................................Pointless (CDl)
Spark plug:
G455AVS ......................................Champion RCJ-7Y
G500AVS ......................................Champion RCJ-6Y
Oil feeding system: ...... Automatic pump with adjuster
Sprocket (Teeth x Pitch): ............................ 7T x 0.325
Dimensions (L x W x H) (mm): ............ 410 x 235 x 265
Dry weight
Power unit only (kg):
G455AVS ............................................................ 4.85
G500AVS ............................................................ 4.90
Limited warranty
Should any failure occur on the product under normal
operating conditions within the applicable warranty pe-
riod, the failed part will be replaced or repaired free of
charge by a ZENOAH authorized dealer.
WARRANTY PERIOD: 1 year (6 months if used profes-
sionally, and 30 days if used for rental purpose) from
the date of initial purchase.
THE PURCHASER SHALL BEAR COSTS OF TRANS-
PORTING THE UNIT TO AND FROM THE ZENOAH
DEALER.
THE PURCHASER SHALL NOT BE CHARGED FOR DI-
AGNOSTIC LABOR WHICH LEADS TO THE DETERMI-
NATION THAT A WARRANTED PART IS DEFECTIVE, IF
THE DIAGNOSTIC WORK IS PERFORMED AT THE
ZENOAH DEALER.
THE PURCHASER OR OWNER IS RESPONSIBLE FOR
THE PERFORMANCE OF THE REQUIRED MAINTE-
NANCE AS DEFINED BY THE MANUFACTURER IN THE
OWNER/OPERATOR MANUAL.
ANY WARRANTED PART WHICH IS NOT SCHEDULED
FOR REPLACEMENT AS REQUIRED MAINTENANCE,
OR WHICH IS SCHEDULED ONLY FOR REGULAR IN-
SPECTION TO THE EFFECT OF REPAIR OR “REPLACE
AS NECESSARY” SHALL BE WARRANTED FOR THE
WARRANTY PERIOD. ANY WARRANTED PART WHICH
IS SCHEDULED FOR REPLACEMENT AS REQUIRED
MAINTENANCE SHALL BE WARRANTED FOR THE
PERIOD OF TIME UP TO THE FIRST SCHEDULED
REPLACEMENT POINT FOR THE PART.
ANY REPLACEMENT PART THAT IS EQUIVALENT IN
PERFORMANCE AND DULABILITY MAY BE USED IN
NON-WARRANTY MAINTENANCE OR REPAIRS, AND
SHALL NOT REDUCE THE WARRANTY OBLIGATION
OF THE COMPANY.
THE COMPANY IS LIABLE FOR DAMAGES TO OTHER
ENGINE COMPONENTS CAUSED BY THE FAIRURE OF
A WARRANTED PARTS STILL UNDER WARRANTY.
THE WARRANTY DOES NOT APPLY TO THOSE
UNITS WHICH HAVE BEEN DAMAGED BY NEGLI-
GENCE OF INSTRUCTION LISTED IN THE OWNER/
OPERATOR MANUAL FOR PROPER USE AND MAIN-
TENANCE OF THE UNITS ACCIDENT MISHANDLING,
ALTERATION, ABUSE, IMPROPER LUBRICATION,
USE OF ANY PARTS OR ACCESSARIES OTHER THAN
THOSE SPECIFIED BY THE COMPANY, OR OTHER
CAUSES BEYOND THE COMPANY'S CONTROL.
THIS WARRANTY DOES NOT COVER THOSE PARTS
REPLACED BY NORMAL WEAR OR HARMLESS
CHANGES IN THEIR APPEARANCE.
THERE ARE NO OTHER EXPRESS WARRANTIES.
IMPLIED WARRANTIES INCLUDING THOSE OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED TO TWO (2) YEARS OF HOME
USE [ONE (1) YEAR FOR ANY OTHER USE] FROM THE
ORIGINAL DELIVERY DATE.
LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGE UNDER ANY AND ALL WARRANTIES ARE
EXCLUDED.
IF YOU NEED TO OBTAIN MORE INFORMATION,
PLEASE CALL YOUR NEAREST SERVICE CENTER, OR
CHECK PLEASE ZENOAH WEB SITE
http://www.zenoah.net
Cutting head:
Guide bar
Type: ................................................ Sprocket nose
Size (in. (mm)): ............ 14 (350), 16 (400), 18 (450)
Saw chain
Type: ..................................................Oregon 21BP
Pitch (in. (mm)):.................................... 0.325 (8.26)
Gauge (in. (mm)):................................. 0.058 (1.27)
Power (kw/min
-1
)
G455AVS ................................................ 2.06/9,000
G500AVS .............................................. 2.51/10,000
Max speed (min
-1
)
G455AVS ...................................................... 12,000
G500AVS ...................................................... 13,000
Idle speed (min
-1
)
G455AVS ........................................................ 2,500
G500AVS ........................................................ 2,500
Specifications are subject to change without notice.