Filter
Top Products
English-
31
OPERATION
In order, for example, to turn right while
moving forward, move the right control
towards the neutral position. The rotation
of the right wheel is reduced and the
machine turns to the right.
Turning on the spot can be achieved by
moving one control backward (behind
the neutral position) and carefully moving
the other steering control forward from its
neutral position.
Operating on hills
Read the “Slope Operation” in the “Safety
Instruction
” section.
• The slowest speed possible should be
used before starting up or down hills.
• Avoid stopping or changing speed on
hills.
• If stopping is absolutely necessary, pull
drive levers into the neutral position and
push to the outside of the unit and
engage the park brake.
• To restart movement, release the park
brake.
• Pull the control levers back to the center
of the mower and press forward to regain
forward motion.
• Make all turns slowly.
WARNING!
To prevent the machine
from rolling over never drive
the machine on ground with
a slope of more than 10
degrees. Mow slopes
upwards and downwards,
never across. Avoid sudden
changes in direction.
8011-772
Stopping conditions
IMPORTANT INFORMATION
Control levers return to neutral when
released. This may cause the mower to
suddenly stop.
8011-711
Released parking brake
10
10 degrees