Filter
Top Products
722
SAFETY INSTRUCTIONS (continued)
OPERATIONAL SAFETY (continued)
This digger is designed for use only on tractors with 540 RPM power take off.
When the use of hand tools is required to perform any part of assembly, installation, adjustment, maintaining,
repairing, removal, or moving the digger, be sure the tools used are designed and recommended by the tool
manufacturer for that specific task.
Never place yourself between the tractor and digger while implement is in operation.
Do not walk or work under a raised digger or attachment unless it is securely blocked or held in position. Do
not depend on the tractor hydraulic system to hold the digger or attachment in place.
A heavy load can cause instability of the tractor. Use extreme care during travel. Slow down on turns and watch
out for bumps. The tractor may need front counter-weights to counter-balance the weight of the digger.
Never use alcoholic beverages or drugs which can hinder alertness or coordination while operating this
equipment. Consult your doctor about operating this machine while taking prescription medications.
Do not allow riders on the digger or tractor at any time. There is no safe place for any riders.
Before you operate the digger, check over all pins, bolts and connections to be sure all are securely in place.
Replace any damaged or worn parts immediately.
Consult local utility companies to make certain there are no buried gas lines, electrical cables, etc., in the work
area before beginning operation.
Never allow children to operate or be around this digger.
Do not allow anyone who is not familiar with the safety rules and operation instructions to use this Post Hole
Digger.
Do not operate digger on steep hillsides. When digging on uneven or hilly terrain, position the tractor with the
Post Hole Digger uphill. With the Post Hole Digger downhill, the tractor could tip when attempting to pull the
auger from its hole.
Never replace the shear bolt OR auger retaining bolt with any length other than what is specified in this man-
ual. A longer, or protruding fastener is more likely to grab loose clothing or gloves which can result in serious
injury or death.
Use stabilizer bars, adjustable sway chains, or sway blocks on your tractor lift arms to keep the Post Hole
Digger from swinging side to side. Adjust as tightly as practical for best performance.
Never position the auger point by hand or with any tool when the tractor is running.
Never position the auger point by putting your hands on the auger, gearbox, boom, or driveline.
MODEL 300 POST HOLE DIGGER
PTO REPAIR PARTS