Filter
Top Products
4 Introduction
MAN0556 (9/121/2007)
SPECIFICATIONS
Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given for a
loader equipped with a 84" (LF138) and 96" (LF156) material bucket, operated with an average tractor hydraulic
system of 10-20 gpm with engine operating at rated PTO rpm and a control valve relief setting of 2750 psi.
Model LF138 Model LF156
A Maximum Lift Height 138" 156"
B Clearance with Attachment Dumped 103" 121"
C Reach at Maximum Height 32" 36"
D Maximum Dump Angle 50° 50°
E Reach with Attachment on Ground 85" 94"
F Attachment Rollback Angle 35° 35°
G Digging Depth 6" 6"
Overall Height in Carrying Position 74" 81"
Length of Attachment 42" 42"
Lift Capacity to Full Height at Bucket Pin 4280 lbs. 4850 lbs.
Lift Capacity to Full Height - 31.5" Forward of Bucket Pin 2940 lbs. 3480 lbs.
Breakout Capacity at Bucket Pin 6410 lbs. 7140 lbs.
Breakout Capacity - 31.5" Forward of Bucket Pin 4440 lbs. 4990 lbs.
System Pressure Tested 2750 psi 2750 psi
Recommended Hydraulic Flow 10-20 gpm 12-25 gpm
Recommended Tractor PTO Horsepower 65-105 hp 85-140 hp
Lift Cylinder Bore 2.76" 2.95"
Bucket Cylinder Bore 2.76" 2.76"
BUCKET HEAPED CAPACITY WEIGHT
84" QA 28.7 cu. ft. 690 lbs.
84" Pin 28.7 cu. ft. 660 lbs.
96" QA 33.0 cu. ft. 760 lbs.