Woods Equipment DSO1260Q Brush Cutter User Manual


 
22 Owner Service
MAN0571 (Rev. 6/15/2007)
Figure 10. Jackstand Placement and Lubrication Points
REF DESCRIPTION FREQUENCY
1. Front U-Joint 10 hrs.
2. Mid U-Joint 10 hrs.
3. Carrier Bearing Block 40 hrs.
4. Telescoping Shaft 10 hrs.
5. Rear U-Joint 10 hrs.
6. Rotating Drive Shield 10 hrs.
7. Side Drive Yoke (2 Places) 40 hrs.
(grease fitting located near outside gearbox)
8. Gearbox (Check Oil Level) Daily
9. Tailwheel Spindle 20 hrs.
10. Caster Wheel Swivel 40 hrs.
11. Hitch Pivot Sleeve Daily