Filter
Top Products
42 Assembly
MAN0632 (5/15/2007)
INSTALL OPTIONAL CHECK CHAINS
Check chains are used to carry the front of cutter at a
set height.
1. Thread check chains (3) through check chain
bracket (2).
2. Attach lower end of check chain (3) to mast plate (9
or 11) with bolt (6), washer (7), and nut (8).
3. Attach keyhole brackets (2) to each side of tractor
top link bracket (10) with bolt (4) and nut (5).
4. Insert check chains through keyhole brackets and
set cutter height.
Figure 41. Check Chain Installation
BB60X,
BB72X,
BB84X
1. Check chain complete
2. Check chain bracket, lower
3. 3/8 Chain, 32-link and check lug
4. 3/4 NC x 6 Cap screw GR5
5. 3/4 NC Hex lock nut
6. 5/8 NC x 2-1/4 Cap screw GR5
7. 5/8 Flat washer, standard
8. 5/8 NC Hex nut
9. Mast Plate, BB60X, BB72X, BB84X
10. Tractor top link bracket
11. Mast Plate, BB48X
BB48X
(Rev. 5/10/2009)