Filter
Top Products
24 Parts
29927 (Rev. 6/22/2007)
Spindle Assembly
REF PART QTY DESCRIPTION
141161Spindle
2 5089 2 Seal
341141Sleeve
441151Pin
5 4107 2 Bearing cone
6 4117 1 Housing with cups
7 4106 2 Bearing cup
8 1972 1 Grease fitting
9 4105 1 Spindle shaft
10 4110 1 Shoulder washer
11 12170KT 1 16-13/16 Medium suction blade (std
for RM48) -or-
11 26548KT 1 16-13/16 Low suction blade (optional
on RM48) -or-
11 6950KT 1 20-1/4 Medium suction blade
(optional on 59) -or-
11 26559KT 1 20-1/4 Low suction blade (optional
on 59)
12 10658 1 5/8 NC x 1-1/2 Nylok bolt
13 3490 1 Blade bolt wrench (used prior to
1964)
14 2974 1 Spindle lock wrench
16 10635 2 5/8 Cup washer
17 692 1 5/8 Flat washer
18 1015825 1 Blade bolt & washer complete
NOTE: Repair shaft #9 and repair sleeve #3 do not have a
hole drilled in them for pin #4. After new parts have been
assembled and proper bearing adjustment obtained, drill a
3/16 diameter hole through sleeve and shaft. Drive in Sel-
lock pin to hold proper bearing adjustment.