Filter
Top Products
Mount Installation 7
MAN0426 (3/3/2006)
Torque Hardware
Torque all mounting hardware to specifications given
below.
Install Grill Guard (Optional)
1. Align grill guard (A) with holes on front of tractor
frame and secure into position using four cap
screws (B), hardened flat washers (D), and hex
nuts (C).
2. Torque to 50 lbs-ft.
A. 1019012 Grill guard -
(Includes hardware B, C & D)
B. 307301 M12 x 1.75P x 40 mm HHCS
C. 307813 M12 x 1.75 Hex nut
D. 57816 1/2 Hardened flat washer
Figure 7. Grill Guard Installation Figure 8. Grill Guard Installed
TORQUE SPECIFICATIONS
Ref Cap Screw Qty
Wrench
Size Required Torque
7 M12 x 1.75P x 40 mm 8 18 mm 50 lbs-ft. (68 N-m)
9 5/8 NC x 1-1/2 Carriage bolt GR5 10 15/16 170 lbs-ft. (230 N-m)
12 M16 x 2.0P x 40 mm 8 24 mm 125 lbs-ft. (169 N-m)
As a valued customer, Woods appreciates your comments. Once loader mount and
hydraulic hoses have been installed, please take a few minutes to complete the Loader
Mount Evaluation sheet that was supplied with this mount. Your comments will help us
continue to bring you quality products.