Filter
Top Products
6 PN-53661 (Rev. 12/96)
MOUNTING INSTRUCTIONS
Safety is a primary concern in the design and
manufacture of our products. Unfortunately, our
efforts to provide safe equipment can be wiped
out by a single careless act of an operator.
In addition to the design and configuration of
equipment, hazard control and accident preven-
tion are dependent upon the awareness, con-
cern, prudence and proper training of personnel
involved in the operation, transport, maintenance
and storage of equipment.
It has been said “The best safety device is an
informed, careful operator.” We ask you to be
that kind of an operator.
The 111307 Loader Mounting Kit fits John Deere 5500
tractors for use with a DuAl 195 Loader. The 118460
Loader Mounting Kit fits John Deere 5500 tractors for
use with a DuAl 215 loader. The 199758 Hydraulic
Hose Kit fits John Deere 5500 tractors with 195 or 215
Loaders. Refer to DuAl 195 or 215 Loader Operator’s
Manual for loader assembly instructions. Use
instructions in this manual for installing loader
mounting kits and hydraulic hose kit.
Shut off engine and set parking brake during
installation.
If equipped, remove the front end weight bracket and
toolbox from tractor.
WARNING
J Safety instructions are important!
Read this manual and the DuAl Loader
manual and follow all safety rules and
safety decals. (Replacement manuals are
available from dealer or call
1-800-319-6637.) Failure to follow instruc-
tions or safety rules can result in serious
injury or death.
J Do not modify or alter or permit any-
one else to modify or alter the loader,
loader mounting kit, any of its compo-
nents or any loader function.
J Keep all persons away from operator
control area while performing adjust-
ments, service or maintenance.
CAUTION
J Always wear relatively tight and belted
clothing to avoid entanglement in moving
parts. Wear sturdy, rough-soled work
shoes and protective equipment for eyes,
hair, hands, hearing and head.
Front Mount Attachment -- 195 Loader
Attach the front mount (1) to the front of the tractor
bolster and secure with four cap screws (16) and
lockwashers (15). Tighten all fasteners securely.
CM581
1
15 16
1. Front Mount
15. 3/4” Lockwasher
16. 3/4 NC x 3” Hex head cap screw GR5
Figure 1. Front Mount Attachment -- 195 Loader
Front Mount Attachment -- 215 Loader
Attach the right front mount (5) to the tractor frame and
secure with two cap screws (19) and lockwashers (12).
Repeat for opposite side. Tighten all fasteners securely.
CM682
5
19 12
5. Right front mount
12. 5/8” Lockwasher
19. 5/8 NC x 2” Hex head cap screw GR5
Figure 2. Front Mount Attachment -- 215 Loader