Filter
Top Products
7
SECTION 4: CONTROLS
Figure 3
HOUR/RPM METER (If Equipped)
The hour/RPM meter is an LCD (liquid crystal display) display that is located on the right control panel. The
meter’s display stays on continuously. (See Figure 3)
• HOUR METER: The meter functions as an hour meter. The hour value is the number of hours of engine
operation. Use the hour value to determine when maintenance is required and to cost jobs.
• RPM METER: When the engine is on, the meter functions as an engine RPM gauge.
IGNITION/LIGHT SWITCH
Figure 4
The ignition/light switch is located on the right control panel and is used to start the engine. It is a four position
switch. (See Figure 4)
•IntheOFF position the engine is not running.
•IntheON/LlGHT position the engine is running and the head light is on.
•IntheON position the engine is running and the head light is off.
•IntheSTART position the starter is engaged to the engine flywheel.
Front
Hour/RPM Meter
Ignition/Light Switch
PTO Switch
Right Control
Lift Handle
Panel
Off
On/Light
On
Start