White Outdoor Z-185L, Z-205, Z-225 Lawn Mower User Manual


 
5
Never tamper with safety devices. Check their proper
operation regularly. Use all guards as instructed in
this manual.
After striking a foreign object, stop the engine,
remove the wire from the spark plug and thoroughly
inspect the mower for any damage. Repair the dam-
age before restarting and operating the mower.
Grass catcher components are subject to wear, dam-
age and deterioration, which could expose moving
parts or allow objects to be thrown. For your safety
protection, frequently check components and replace
with manufacturer’s recommended parts when neces-
sary.
Mower blades are sharp and can cut. Wrap the
blade(s) or wear gloves and use extra caution when
servicing blade(s).
Check brake operation frequently. Adjust and service
as required.
Muffler, engine and belt guards become hot during
operation and can cause a burn. Allow to cool down
before touching.
Do not change the engine governor settings or over-
speed the engine. Excessive engine speeds are dan-
gerous.
Observe proper disposal laws and regulations.
Improper disposal of fluids and materials can harm
the environment and the ecology.
Prior to disposal, determine the proper method to dis-
pose of waste from your local Environmental Protec-
tion Agency. Recycling centers are established to
properly dispose of materials in an environmentally
safe fashion.
Use proper containers when draining fluids. Do not
use food or beverage containers that may mislead
someone into drinking from them. Properly dispose of
the containers immediately following the draining of
fluids.
DO NOT pour oil or other fluids into the ground, down
a drain or into a stream, pond, lake or other body of
water. Observe Environmental Protection Agency
regulations when disposing of oil, fuel, coolant, brake
fluid, filters, batteries, tires and other harmful waste.
WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who
read, understand and follow the warnings and instructions in this manual and on the machine.
Figure 2 Safety Labels Found On Unit