Filter
Top Products
SERVICE AND ADJUSTMENTS
Depress clutchbrake pedal fully and set parking brake.
Place gearshift lever in neutral
(N)
position.
Place attachment clutch
in
"DISENGAGED" position.
Turn ignition key
"OFF"
and
remove key.
Make sure the blades and all moving parts have completely stopped.
ct spark plug wire from spark plug and place wire where
it
cannot come
in
contact
TO
REMOVE
MOWER
(See
Fig.
16)
Mower will be easier to remove from the right side of trac-
tor.
Place attachment clutch in "DISENGAGED position.
Move attachment lift lever forward to lower mower to
its lowest position.
Roll belt off engine pulley.
Disconnect clutch rod from clutch lever
by
removing
retainer spring.
Disconnect anti-sway bar from chassis bracket by re-
moving retainer spring.
Disconnect suspension arms from rear deck brackets
by removing retainer springs.
Disconnect front links from deck by removing retainer
springs.
Raise lift lever to raise suspension arms. Slide mower
out from under tractor.
IMPORTANT:
IF AN ATTACHMENT OTHER THAN THE
MOWER DECK
IS
TO BE MOUNTED ON THE TRACTOR,
REMOVE THE FRONT LINKS.
TO
INSTALL
MOWER
(See
Fig.
16)
-
Raise attachment lift lever to its highest position.
Slide mower under tractor with discharge guard to
right side of tractor.
-
Lower lift lever to its lowest position.
Install mower in reverse order of removal instructions.
RETAINER SPRING
ANTI-SWAY
B
FIG.
16