Filter
Top Products
5
For normal homeowner use, the muffler and
spark arresting screen will not require any
service.
After 50 hours of use, we recommend that
your muffler be serviced or replaced by your
authorized service dealer.
ASSEMBLY
WARNING: If received assembled,
repeat allsteps t oensure your unitis properly
assembled and all fasteners are secure.
Examine parts for damage. Do not use dam-
aged parts.
NOTE: If you need assistance or find parts
missing or damaged, call 1-800-554-6723.
It is normal for the fuel filter to rattle in the
empty fuel tank.
Finding fuelor oil residue onmuffler isnormal
due t o carburetor adjustments and t esting
done by the manufacturer .
ADJUSTING THE HANDLE
WARNING: When adjusting the assist
handle, besure itremains above thesafety label
and below the m ark or arrow on the shaft.
1. Loosen wing nut on handle.
2. Rotate the handle on the shaft to an u pright
position; retighten wing nut.
ATTACHING SHIELD
WARNING: The shield must b e prop-
erly installed.The shield p rovide s partial protec-
tion from the risk ofthrown objects to the opera-
tor and others and is equipped with a line limiter
blade which cuts excess line to the proper
length. The line limiter blade (on underside of
shield) is sharp and can cut you.
For proper orientation of shield, see KNOW
YOUR TR IMMER i llustratio n in OPERA TION
sectio n.
1. Remove wing nut from shield.
2. Insert bracket into slot as shown.
3. Pivot shield untilbolt p asses through holein
bracket.
4. Securely tighten wing nut onto bolt.
Slot
Shield
Wing
Nut
Bracket
Line Limiter Blade
PIVOT