Filter
Top Products
7
Scalping
MOWING
Your trimmer is ideal for mowing in places
conventional lawn mowers cannot reach. In
the mowing position, keep the line parallel to
the ground. A void pressing the head into the
ground asthis canscalpthe g roundanddam-
age the tool.
Mowing
SWEEPING
The fanning action of the rotating line can be
used for a quic k and easy clean up. Keep the
line parallel to and above the su rfaces being
swept and move the tool from side to side.
Sweeping
MAINTENANCE
WARNING: Disconnect power
source before p erforming maintenance.
GENERALRECOMMENDATIONS
Thewarrantyonthisunit doesnotco veritems
that have been subjected to operator abuse
or negligence. To receive full value from the
warranty, the operator must maintain unit as
instructed in this manual. Various adjust-
ments will need to be made periodically to
properly maintain your unit.
BEFORE EACH USE
CHECK FOR LOOSE
FASTENERS AND PARTS
S Housing Screws
S Locking Sleeve Assembly
S Assist Handle
S Debr is Shield
S Edge Guide
CHECK FOR DAMAGED OR
WORN PARTS
Contact an authorized service dealer for re-
placement of damaged or worn parts.
S Trigger Switch -- Ensure switch functions
properly by pressing andreleasing the trig-
ger switch. Make sure motor st ops.
S Debr is Shield -- Discontinue use of unit if
debris shield is damaged.
AFTER EACH USE
INSPECT AND CLEAN UNIT AND DE-
CALS
S After each use , inspect complete unit for
loose or damaged parts. Clean the unit us-
ing a damp cloth with a mild detergent.
S Wipe off unit with a clean dry cloth.
SERVICE AND ADJUSTMENTS
REPLACING THE LINE
Pre--wound spools offer the most convenient
method for replacing line and ensuring opti-
mum performance.
S Replacem ent spools are color--coded to
ensure use of the correct spool with your
unit. Besuretousethe samecolor spoolas
the exi sting spool.
NOTE:Alwayscleardirt anddebrisfromcu t-
ting head components when performing any
type of maintenance.
S Hold spool and unscrew cap by turning in
the direction shown on top of the cap.
S Remove line guide ring and spool.
Cap
Spool
L
ine guide ring
Use a pre--wound spool or refill spool with
line. If usingapre--woundspool, removetape
strip from line and spool.